![[2026NEW Model] 5000A Jump Starter with Air Compressor,Car Jumper Starter](https://yovencegarage.com/wp-content/uploads/2026/05/71oG4PFNsmL._AC_SL1500_-350x350.jpg)
![[Upgraded] SUPERONE Retractable Car Charger 4 in 1, Fast Car Phone Charger](https://yovencegarage.com/wp-content/uploads/2026/05/61F2Q2HxSL._AC_SL1500_-350x350.jpg)
NEXPOW 2000A Peak Car Jump Starter with USB Quick Charge 3.0
Original price was: $99.00.$69.00Current price is: $69.00.
11 sold in last 31 hours
Hurry! Over 4 people have this in their carts
Only 12 item(s) left in stock.
... people are viewing this right now
Compare
🚗【UPGRADE QDSP TECHNOLOGY】 With the same battery capacity, our new Quick Discharge Start Power jump starter has 3-5 times enhanced current compare to the old 2nd generation. At the same time, it can balance the temperature by reducing the start-up temperature through disruptive innovation of the battery/assembly structure to ensure a safe start.
🚗【SUPER CAPACITY AND PEAK】 The car jump starter can jump-start your vehicle (up to 7.5L gas or 6.5L diesel engine) up to 20 times with 2000-amp peak current and heavy-duty clamps and cables. Even if the car battery is dead, it also can restart the vehicle. Additionally, our battery starter could start trucks, motorcycles, snowmobiles, ATV, UTV, lawnmowers, and yachts up in a few minutes, even in extreme temperatures (-4°F~140°F).
🚗【IMPROVED SAFETY TECHNOLOGY】 The car battery jump starter pack is safe and easy to use without the worry of incorrect connections or sparks. It is spark-proof, has reverse polarity protection, low voltage protection, high-temperature protection, and over-load protection. You can safely connect it to any 12-volt automotive car battery. The specially designed indicator notifies you of incorrect use with an audible buzz and flashing lights.
🚗【PORTABLE EMERGENCY POWER BANK】 Designed with 2 USB outputs (5V/3A)and (5V/2.1A), the quick charge 3.0 USB port can fully charge your cellphones, tablets, and other mobile devices at the fastest speed possible.🚗【LED FLASHLIGHT】The LED work light has 3 modes: Flash Light, Strobe Light, and SOS Light. This multi-purpose flashlight is great for camping, outdoors, indoors, emergencies, travel, etc.
🚗【IN THE BOX 】 The package includes a Portable Lithium Car Battery Jump Starter Pack, Heavy-Duty Battery Clamps, USB Type-C Charging Cable, User manual, Delicate Carrying Case, and 15W Adaptor.
🚗【TIPS】 Before starting the car, please ensure that the power is greater than 25%. Additionally, if you have not used it for a long time, it is recommended to charge the jump starter every 2-3 months to keep the jump starter in a healthy state.
Related Products
FOXWELL NT201 OBD2 Scanner Engine Code Reader for Cars and Trucks | Reset Check Engine Light, Read & Clear Fault Codes, View Live Data & Check I/M Readiness, OBDII Diagnostic Tool Since 1996
$39.99
Add to cart
- Read & Clear Check Engine Light: When your dashboard lights up with that check engine light, FOXWELL NT201 puts the answers in your hands. Plug it into your vehicle’s OBD2 Scanner, and within seconds you’ll see exactly what triggered the warning. This engine code reader allows you to read the fault code, understand the issue, and after making repairs, clear the code to turn off the light. No more expensive diagnostic fees at the repair shop—just straightforward information when you need it most.
- One Key Emissions Readiness Check: Worried about passing your state’s smog check or annual inspection? This car scanner takes the guesswork out of the process with a dedicated hotkey for I/M readiness testing. Press it once, and the scanner immediately shows you whether your vehicle’s emission monitors are ready for testing. The color-coded indicator lights (red/yellow/green) give you a clear visual status at a glance—no menu diving, no technical know-how required. Use it before heading to the testing station and avoid the disappointment of being turned away.
- Live Data & Oxygen Sensor Diagnostics: This diagnostic scanner displays live data as you drive or idle, providing insight into your vehicle’s health. Monitor RPM, coolant temperature, intake air temperature, oxygen sensor readings, and other key parameters on the crisp 2.4-inch color screen. Whether tracking down intermittent issues or monitoring engine performance, live data helps you catch small problems before they become costly repairs. The scanner also supports live O2 sensor test mode for vehicles using the CAN protocol, allowing you to analyze exhaust gas oxygen content and evaluate engine efficiency—a valuable vehicle diagnostic tool for fuel mixture and catalytic converter issues.
- Compatible with Cars Since 1996: FOXWELL NT201 code reader works with virtually all 1996 and newer gasoline-powered vehicles sold in the United States, including sedans, SUVs, light trucks, minivans, and hybrids that use the standard 16-pin OBD2 connector. This car reader diagnostic for all cars is designed specifically for engine and emissions diagnostics. It does not work with electric vehicles, 24V heavy-duty trucks, or non-engine systems such as ABS brakes, airbags, or transmission.
- Plug-and-Play Simplicity with Lifetime Free Updates: Designed with everyday car owners in mind, FOXWELL NT201 requires no special skills or technical background. Simply locate your vehicle's OBD2 scanner connection (usually under the dashboard), plug in the scanner, and power it on—no external power source or battery required. You pay a single price and get everything included—no monthly fees, no surprise charges. Plus, the scanner comes with lifetime free updates to ensure it remains compatible with newer vehicle models as they hit the road. It's a one-time investment that keeps working for you year after year.
DEWALT DXAEPS14 1600 Peak Battery Amp 12V Automotive Jump Starter/Power Station
-5%Limited
Original price was: $211.00.$200.00Current price is: $200.00.
88 in stock
1600A Battery Jump Starter 16000mAh Pack 12V with Jumper Cables, Portable USB QC
-14%Limited
Original price was: $69.00.$59.00Current price is: $59.00.
120 in stock
HULKMAN Alpha85 Smart JumpStarter 2000 Amp 20000mAh Car Starter for up to 8.5L
-25%Limited
Original price was: $199.00.$149.00Current price is: $149.00.
14 in stock
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
$55.96
Add to cart
- 【Read Fault Codes】About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes.
- 【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code will appear again even though you cleared before, if you don't repair the car completely. The fault code only can be cleared by NT301 after car repair finished, as like all the obd2 scanner's working principle.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2. It's a basic code reader and DOESN'T't support to scan ABS, SRS, EPB, A/C systems, battery, etc, . It also DOESN'T support ANY special functions like bidirectional control, calibration or reset advanced function related.
- 【Advanced OBDII Modes 】 This car scanner provides enhanced obd2 modes capabilities: O-2 sensors test and EVAP system leak monitor. It allows you to run a leak check on your car’s EVAP system and assess the fuel tank’s condition. The O-2 sensor test helps optimize the air-fuel ratio, boosting fuel economy and cutting em-issions. Saving you money on gas and reducing your vehicle’s environmental footprint.
- 【OBDII Protocols & Compatibility】The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
- 【Lifetime Updates + 1-Year Seller Assurance】Enjoying plug and play and peace of mind with our 1-year seller assurance. No need to update before use. If you receive a damaged, used, or incomplete unit, we’ll replace it or issue a full refund. If you’re not satisfied and choose to return it, please mark it as “unsellable” so it won’t be resold to another customer—we appreciate your honesty.
- 【What It DOES NOT Do – Be Fully Informed Before Purchasing】This is a basic OBD2 code reader, not a professional scan tool. It does NOT support: ABS, SRS, EPB, A/C systems etc, ; Any special resets (bidirectional control/Calibration/Reset advanced function related). Please check compatibility before purchasing—functionality varies by year, make, model, and VIN.
23 in stock
ANCEL VD700 OBD2 Diagnostic Code Reader Scan Tool Fit for Volkswagen Audi VW Skoda Seat, All Functions OBD11 Scanner for VAG Vehicles with Battery Registration EPB Reset (Upgraded VD500)
$126.99
Add to cart
- 【Professional Advanced Diagnostic Tool for VW Owners】The ANCEL VD700, an upgraded version of the ANCEL VD500, is an advanced scan tool designed for VW owners. (Note: Only compatible with vehicles before 2023 and does not work with battery electric vehicles (BEVs).) It offers full-system diagnostics and professional maintenance functions (varies by vehicle model, year, configuration, and installed modules). Compared with having these service done by a shop, this obd2 scanner for VW will save you a bunch of money and time
- 【All-in-One Specific Functions for VAG Vehicles】Having trouble with your VAG vehicle? The ANCEL VD700 offers comprehensive maintenance functions, including throttle position adaptation, brake pad reset (EPB only), TPMS reset (not programming/relearn), steering angle learning, oil service reset, injector learning, and battery registration (not coding/programming; same-spec battery only), etc. May help with certain supported functions. (NOTE: No ABS Bleeding/ECU/module/battery coding, programming, reprogramming, or software writing. Special features vary by vehicle. Please provide your car model and year and contact us for details.)
- 【Full-System Diagnostic, Locate Problem for VAG Vehicles】 The ANCEL VD700 code reader for VW supports full-system diagnostics (varies by vehicle model, year, configuration, and installed modules), such as ABS, SAS, SRS, ESP, TPMS, Transmission, Engine, Immobilizer, and Battery systems. Efficiently help you diagnose vehicle issues, prevent potential problems, and ensure your vehicle remains in top condition. NOTE: Before clearing the fault codes, ensure the faults have been repaired; if the fault remains, the code may return
- 【No Hidden Costs, No Extra Charges】Tired of hidden charges? Unlike other devices that require additional fees, ANCEL VD700 offers 100% full access to all included supported features, with no hidden costs or subscription fees. Function availability varies by vehicle. Help you enjoy peace of mind and save maintenance costs
- 【Lifetime F-ree Update Service】VD700 code reader via 2.8 inch screen 2 colors UI theme and 11 display languages to display test results. Lifetime free software updates and special feedback function available to fix the latest bugs or add new parameters. Just download the software from the official website and then follow the on-screen instructions to install it. The update software fits for Windows 7/8/10/11; Mac OS is not supported for software update
- 【OBD 6 Modes for Most Vehicles】 For Volkswagen Vehicles with OBD II 16-pin ports: Provides both basic OBDII diagnostics and specialized VAG-specific features. Auto-detect vehicle model makes it easy to use. Ideal for individuals and auto repair shops. For other OBDII-compliant vehicles, VD700 supports basic OBDII engine/emission diagnostics only (read/clear codes, display definitions, turn off CEL, live data, EVAP test, I/M, VIN), but not VAG-specific features
VTOMAN V10 Pro Jump Starter, 4500A Portable Car Starter
-41%Limited
Original price was: $169.00.$99.00Current price is: $99.00.
21 in stock
AVAPOW 6000A Car Battery Jump Starter(for All Gas or up to 12L Diesel)
-23%Limited
Original price was: $219.00.$169.00Current price is: $169.00.
130 in stock
BRPOM Car Jump Starter with Air Compressor, 150PSI 4500A Peak 24000mah
-22%Limited
Original price was: $139.00.$109.00Current price is: $109.00.
53 in stock
Reviews
There are no reviews yet.